How To Thread A Bobbin Brother
The Best How To Thread A Bobbin Brother Ideas. Thread the upper thread system and needle. Insert the bobbin into your sewing machine.
Before embroidering, check that there is enough thread in the bobbin. If you put the bobbin backwards then the bobbin will get caught in the throat plate and will not be. Raise the presser foot lever.
Pull The Bobbin Thread Up.
If you put the bobbin backwards onto the sewing machine then it will cause the needle to jam. Once you have the bobbin tension set, test your machine again by sewing with one color on the zigzag setting. ” to thread the machine with the upper thread and.
Insert The Bobbin Into Your Sewing Machine.
* this movie is being streamed from youtube. How do i pull up the bobbin thread? To tighten it, turn clockwise.
Put The Tip Of The Thread To One Of The Bobbin’s Holes.
Here is how to go about it. Now that you',ve correctly set the lower bobbin thread, you have to thread the upper bobbin thread. Raise the needle by turning the handwheel toward you (counterclockwise).
This Process Can Be Broken Down Into 3 Main Stages:
Use the screwdriver to adjust the bobbin case tension. If you put the bobbin backwards then the bobbin will get caught in the throat plate and will not be. (1) mark on the handwheel.
Learn How To Thread The Brother Cs6000I And Wind A Full Bobbin.
First, turn the sewing machine off and lift the presser foot. How to thread the brother sewing machine #1. Video instructions for winding the bobbin and lower thread setting .
Post a Comment for "How To Thread A Bobbin Brother"