How To Thread Sewing Machine Brother
Famous How To Thread Sewing Machine Brother Ideas. Presser foot image may be different, depending on your model. Raise the presser foot using the presser foot lever.
Start here by learning how to properly thread your se. Sew trial stitches using thread and scrap fabric that are the same as those used for your project. Put the thread through the machine’s first thread guide on the upper left.
Remove The Needle From The Device And Place It In Your Left Hand.
Insert the thread through the eye of the needle from front to back. Take the end of your thread and pass it over the thread guide as shown in the picture on. Follow the instructions below to thread the machine.
First, You Will Need Some Thread And A Needle.
Pivot the spool pin so that it angles upward. Set the thread spool on the spool pin so that the thread unwinds from the front of the spool. It was affixed to the brother dream material.
Continue Threading However Do Not Pass The Thread In.
If the presser foot is not raised, the machine. This guide will show you how to use the needle threader on a brother sewing machine. Place your spool of thread onto the spool pin.
Presser Foot Image May Be Different, Depending On Your Model.
After loading the bobbin, it’s time to set the tension for the right stitches. This will raise the presser foot and allow you to begin the threading process. With the thread, go backward and forwards.
In This Video I Show You How To Thread Your Brother Ce1100Prw Sewing Machine.
Hold the end of the thread with your left hand, and then guide the thread through the groove, following the arrows in the illustration. Pull thread into the spring of the thread guide (1). Pass the thread through the guide.
Post a Comment for "How To Thread Sewing Machine Brother"