How To Thread A Bobbin On A Brother
Awasome How To Thread A Bobbin On A Brother 2022. The bobbin tension should look like this. Next, you will want to raise the needle and pull it to the right for a.
If you put the bobbin backwards onto the sewing machine then it will cause the needle to jam. We recommend using the included embroidery bobbin thread with this bobbin case. For this step, you will need a small size notched screwdriver.
Thread The Upper Thread System And Needle.
Pull the bobbin thread up. Slide the bobbin cover latch to the right and remove the bobbin cover. Hold the end of the thread with your left hand, and with your right hand, wrap the free end of the thread.
Once You Have The Bobbin Tension Set, Test Your Machine Again By Sewing With One Color On The Zigzag Setting.
Put the tip of the thread to one of the bobbin’s holes. Wind some amount of thread around the. 1 leave 1 cm 1 2 inch of thread from the hole on the bobbin.
Pass Your Thread Through The Hole At The Base Of The Bin.
Use the screwdriver to adjust the bobbin case tension. On the side of the sewing machine is a wheel that moves the needle. Insert the bobbin into your sewing machine.
Learn Just How Easy It Is To Wind And Thread Bobbins For Your Brother Sewing Machine.
Click on the image to play the video instructions. How to thread the brother sewing machine #1. How to thread the bobbin on a brother sewing machine step 1.
Next, You Will Want To Raise The Needle And Pull It To The Right For A.
Insert the bobbin into the bobbin case so that the thread unwinds to the left. Make sure you are taking through the inside, not starting from the outside. Use a screwdriver to adjust the bobbin case tension.
Post a Comment for "How To Thread A Bobbin On A Brother"