How To Thread A Bobbin - Brother Jx2517
The Best How To Thread A Bobbin - Brother Jx2517 Ideas. If you need further assistance, please contact brother customer service: Brother jx2517 lightweight &, full size sewing machine + 25 year limited.
Make sure your sewing machine is still off, the presser foot is. Turn hand wheel toward you until the needle is in its highest position. Insert the bobbin with the thread coming from the bottom toward the top and the thread tail hanging out of the.
First Off, Take The Thread And Put It Through The Small Opening In The Bottom.
Hold the bobbin case with one hand. Learn how to thread with kandia haynesworth, sewing instructor and host of sew it and show it!. (1) bobbin cover reinstall the bobbin.
Turn Hand Wheel Toward You Until The Needle Is In Its Highest Position.
While lightly holding the end of the upper thread, slowly. Also learn how to thread your brother jx2517 sewing machine:. Turn the bobbin clockwise, by hand, until the projection slides into the notch of the bobbin.
It’s The Small Silver Pin At The Top Of Your Machine.
Pass the end of the thread through the presser foot and. See full tutorial for this. Once the lower, bobbin thread is set, it’s time to thread the upper thread on your brother sewing machine.
Turn The Car Off And.
Make sure your sewing machine is still off, the presser foot is. Lightly hold down the bobbin with your right hand as shown (a), guide the thread through the slit (b). If you need further assistance, please contact brother customer service:
1 Leave 1 Cm 1 2 Inch Of Thread From The Hole On The Bobbin.
Push it to the right until it snaps. The brother jx2517 has a dial to adjust the tension that controls the bobbin and needle thread. 276,144 views jan 25, 2015 gotta brother jx 2517 sewing machine?
Post a Comment for "How To Thread A Bobbin - Brother Jx2517"